Intake Filter Media Market Statistics – 2027
The global intake filter media market valued at $5.15 billion in 2019 and is projected to reach $6.85 billion in 2027, registering a CAGR of 4.6%.
One of the critical requirements to derive the best engine performance, low fuel consumption, and decreased pollutant emission is the uncontaminated intake air. The clean air that enters the engine very much depends on the efficiency of an air filter that has to block the soot, dust, and tire wear particles from entering the engine intake system. Intake filter media is the air cleaning part fixed in air filters to capture the dust and other particles from the air before allowing them to enter the engine. The use of different kinds of air filter media depends on various application areas, for instance, automotive, aerospace, marine, and others. There are various kinds of air filter materials (for instance, paper, foam, or cotton) that can be chosen to capture different types of particulate matter from entering the engine. The intake air filter media prevents the entry of particulate matter into the engine's cylinders, where it can cause severe mechanical wear and oil contamination.
An important characteristic of an air filter media is its particle capture effectiveness. It is calculated in percentage and specifies the fraction of particles present in the intake air that remains in the air filter. An efficient intake filter media has an efficiency of up to 99.9%. This means that almost all the contaminants are filtered by the intake filter media and it creates favorable conditions for longer maintenance life even under high particulate environments.
By Application
Automotive is projected as the most lucrative segments
The engines that are manufactured today have to satisfy the emission standards set by the respective authorities in different countries. To achieve improved combustion and lower emissions, engines require cleaner air. As the intake filter media provides cleaner air to the engines, the demand for air filters equipped with superior intake filter media is anticipated to grow significantly over the forecast timeframe.
The intake filter media market is segmented into application, filter media, distribution channel, vehicle type, mode, and region. Based on application, it is further divided into automotive, aerospace, marine, and others. Based on filter media, the market is bifurcated into cellulose and synthetic. Depending on distribution channel, it is fragmented into OEM and aftermarket. On the basis of vehicle type, the market is classified into passenger car, commercial vehicle, construction equipment, marine vessels, and others. Based on mode, the market is distributed into off road and on road. Region-wise, the market is analyzed across North America, Europe, Asia-Pacific, and LAMEA.
Key players operating in the global intake filter media market include Ahlstrom-Munksjö, ACDelco, Brackett Aero Filters, Inc., Cummins Inc., Denso Corporation, Donaldson Company Inc., Freudenberg SE, Hengst SE, K&N Engineering, Inc., MAHLE GmbH, MANN+HUMMEL International GmbH & Co. KG, Parker Hannifin Corp, Porvair Filtration Group, Sogefi S.P.A., and Toyota Boshoku Corporation.
By Filter Media
Synthetic filter media is projected as the most lucrative segment
Stringent government regulations regarding harmful automobile emissions
The transportation industry is one of the major contributors to air pollution across the world. Trucks, buses, and cars that are powered by fossil fuels release harmful emissions into the environment. These harmful pollutants include particulate matter, volatile organic compounds, nitrogen oxides, carbon monoxide, and sulfur dioxide. To decrease automobile emissions, regulatory bodies, such as the United States Environmental Protection Agency (EPA), implemented several regulations such as Standards for Exhaust and Evaporative Emissions, Control of Hazardous Air Pollutants and Air Toxics, and the National Low Emission Vehicle Program. Moreover, the implementation of regulations, such as Euro-6 in the European Union and BS-VI in India, has tightened the norms regarding automobile emissions.
While fitting an air filter in the engine’s exhaust helps in reducing the release of pollutants into the atmosphere, the air intake filter plays an important role in controlling the release of harmful GHG emissions. The significance of an engine air intake filter has increased significantly over the years primarily due to stringent emission regulations. The air usually contains several impurities with distinct sizes, which can affect the engine functioning and performance after they enter the vehicle’s engine. The processes responsible for the harmful release of emissions are closely linked with the primary fuel combustion process. The emission from the exhaust greatly depends upon the air quality as the percentage of air involved in the combustion process is much higher than the fuel. In addition, the intake air filters increase the efficiency of the engine by removing fine dust particles and other foreign particles in the air that enter the engine.
By Distribution Channel
Aftermarket is projected as the most lucrative segment
As the intake filter media is the most important component of the air filter, the rising demand for air filters is anticipated to propel the growth of the global intake filter media market over the forecast timeframe.
Use of nanotechnology for air filtration
Air filter media is a crucial component that decides the efficiency of air filtration. The technological advancements regarding the use of appropriate material for filter media over the years have resulted in the development of superior quality intake filter media. Combustion air often comprises particles that must not be permitted to enter the engine. The usage of an extremely efficient air filter becomes essential to safeguard the engine and its parts, such as the turbocharger, against defects and wear caused by dirt particles. Nanofiber filters offer an exceptionally high dust separation efficiency of around 99.99% for the removal of particles along with the low flow control and extended service life. This significantly increases the power output of the engines. The advent of nanofiber filter media for engine air intake filtration is expected to boost the efficiency of intake air filters market.
By Vehicle Type
Commercial Vehicle is projected as the most lucrative segments
Emergence of washable air filters
Washable air filter is a type of engine intake air filters that don’t need periodic replacements and can be reused after washing them with appropriate cleaning solutions. Washable filters are easy to install, save money in the long run, incur low maintenance costs, and offer longer life for air filter media. Mostly, all washable air filters must be cleaned and re-oiled in about 50,000 miles as compared to changing a non-reusable air filter after around 15,000 miles. One of the most popular washable air filters is offered by K&N Engineering that is cost-effective for customers in the long run as the filter can be fitted and is ready to function just after washing and re-oiling. Some of the prominent manufacturers of washable air filters are AIRAID, K&N Engineering, and AEM Induction Systems. Original equipment (OE)-fitted washable air filters are fitted in cars such as Volkswagen Jetta and Toyota Fortuner.
Although the market for washable intake air filters is in an emerging state, the benefits associated with reusable air filters are anticipated to bolster their demand over the years. This is expected to affect the sales of aftermarket intake air filters and restrain the growth of the intake filter media market over the forecast timeframe.
By Mode
On Road is projected as the most lucrative segments
Growing demand for aircraft filters
The global passenger air traffic has witnessed an upward trend since 2009, and is anticipated to grow over the years. According to the International Civil Aviation Organization’s (ICAO) yearly worldwide statistics, the total number of commuters carried on scheduled flights rose to 4.38 billion in 2019, which was 3.65% higher than the previous year. The highest passenger traffic was witnessed in the Asia-Pacific region. In October 2018, the International Air Transport Association (IATA) publicized that the current developments in air transport projects that the passenger count could double to 8.2 billion in 2037.
However, the COVID-19 pandemic created havoc for the aviation industry as almost all aircraft were grounded for most time of the year. According to ICAO, owing to the pandemic, the aviation industry witnessed an overall reduction of 2,600 million passengers or 60% reduction and suffered a loss of $370 billion in 2020 as compared to 2019. However, the aviation sector is anticipated to revive soon and the passenger air traffic will bounce back to its earlier levels in a short span of time. This is anticipated to escalate the demand for aircraft across the world. Increased passenger air traffic will lead to an increase in flight hours per aircraft, thereby resulting in shorter air filter replacement periods. This is anticipated to be one of the main factors increasing the demand for aircraft filters and boosting the growth of the global intake filter media market over the forecast timeframe.
By Region
Asia Pacific would exhibit the highest CAGR of 5.1% during 2020-2027.
COVID-19 Impact Analysis
- The COVID-19 impact on the intake filter market is unpredictable, and is expected to remain in force till the second quarter of 2021.
- The COVID-19 outbreak forced the governments across the globe to implement strict lockdowns and made social distancing mandatory to contain the spread of the virus. Consequently, several organizations started work from home programs for safety measures. This led to sudden fall in demand for automobiles across the world.
- Moreover, nationwide lockdowns forced the automotive manufacturing facilities to partially or completely shut their operations.
- The adverse impacts of the COVID-19 pandemic resulted in delays in the activities and initiatives regarding the development of innovative intake filter media solutions.
Key Benefits For Stakeholders
- This study presents the analytical depiction of the global intake filter media market analysis along with the current trends and future estimations to depict imminent investment pockets.
- The overall intake filter media market opportunity is determined by understanding profitable trends to gain a stronger foothold.
- The report presents information related to the key drivers, restraints, and opportunities of the global intake filter media market with a detailed impact analysis.
- The current intake filter media market is quantitatively analyzed from 2019 to 2027 to benchmark the financial competency.
- Porter’s five forces analysis illustrates the potency of the buyers and suppliers in the industry.
Intake Filter Media Market Report Highlights
| Aspects | Details |
 By Application |
|
 By Filter Media |
|
 By Distribution Channel |
|
 By Vehicle Type |
|
 By Mode |
|
 By Region |
|
 Key Market Players | DONALDSON COMPANY INC., PARKER HANNIFIN CORP, FREUDENBERG SE, SOGEFI S.P.A., HENGST S, MAHLE GmbH, PORVAIR FILTRATION GROUP, MANN+HUMMEL INTERNATIONAL GMBH & CO. KG, AHLSTROM-MUNKSJÖ, DENSO CORPORATION, ACDELCO (SUBSIDIARY OF GENERAL MOTORS), BRACKETT AERO FILTERS, INC., K&N ENGINEERING, INC., TOYOTA BOSHOKU CORPORATION, CUMMINS INC.c |
Analyst Review
The global intake filter media market is expected to witness significant growth due to rising demand for intake filter media from several commercial applications.
Stringent government regulations regarding harmful automobile emissions and the use of nanotechnology for air filtration are expected to provide lucrative opportunities for the intake filter media market during the forecast period. However, certification changes for the use of inlet barrier filters for helicopters and emergence of washable air filters are anticipated to hamper the growth of the market. Moreover, growing demand for intake filter media for alternative fuel vehicles along with aircraft filters is expected to offer lucrative opportunities for the market in future.
The use of good quality intake filter media boosts the performance of the engine as it filters out the dust and other particles from entering the intake system. It improves the engine torque and reduces the maintenance cost of the engine components. The advent of nanofibers has really improved the filtration capability of intake filter media and many OEMs are fitting nanofiber media in their air filters. Rising awareness regarding the significance of intake filter media and the growing demand for intake filter media in varied applications offer numerous opportunities for the growth of the intake filter media market over the forecast timeframe.
Moreover, increasing technological advancements regarding the development of intake filter media are anticipated to bolster the demand for intake filter media market over the years. Besides, increasing digitization in automobiles, such as cars, trucks, light commercial vehicles, and others, allows the drivers to know about the performance conditions of different components, including air filters. This factor is expected to boost the awareness regarding air filters and is projected to propel the sales of intake filter media market over the forecast timeframe.
Among the analyzed regions, Asia-Pacific is the highest revenue contributor, followed by Europe, North America, and LAMEA. On the basis of forecast analysis, Asia-Pacific is expected to maintain its lead during the forecast period, owing to the flourishing automotive industry in the region and the presence of countries, such as China and India, which are the global production hubs for automotive components.
The global intake filter media market was valued at $ 5,153.60 million in 2019, and is projected to reach $ 6,852.05 million by 2027, registering a CAGR of 4.6% from 2020 to 2027.
The manufacturing and supply-chain regarding the automotive components is expected to bounce back amid the lifting lockdown measures and the consequent resuming of transportation activities across the globe
The report sample for global intake filter media market report can be obtained on demand from the website.
Increased usage of nanofiber based intake filter media for cleaning the engine intake air
Acquisition, Product Launch, Partnership, Investment, and Business Expansion are the top most competitive developments which are adopted by the leading market players in the global intake filter media market
The company profiles of the top players of the market can be obtained from the company profile section mentioned in the report. This section includes analysis of top ten player’s operating in the industry along with their last three year revenue, segmental revenue, product offerings, key strategies adopted, and geographical revenue generated
Based on the intake filter media market analysis, Asia Pacific region accounted for the highest revenue contributor in 2019 and is expected to see lucrative business opportunities during the forecast period
By application, the automotive segment is expected to gain traction over the forecast period
The U.S and China has are key matured markets growing in the global intake filter media market
The demand for superior intake filter media; and increasing involvement of new players
Loading Table Of Content...
