Marine coating is used for protection against UV radiation, fouling, ingestion, and salt water, and is employed under marine conditions. It is necessary that the ship is protected ...
Report Code : A06915 | Category : Materials and Chemicals
Sulfur black dye is a polymeric compound of high molecular weight produced by the sulfur or sulfide reaction with phenols and amines. The market for sulfur black dyes ...
Report Code : A06925 | Category : Materials and Chemicals
Metallic friction and subsequent abrasion are natural properties of most metals, which may severely damage constructed sites and pipelines. Therefore, abrasion-resistant coatings are extremely critical across various industry ...
Report Code : A06993 | Category : Materials and Chemicals
Silver enamel paint is a paint that air-dries quick to a glossy, tough finish. The global silver enamel market is predicted to register significant growth, owing to the ...
Report Code : A07017 | Category : Materials and Chemicals
Fuel additive is a performance modifier, which is formulated to enhance the existing properties and the efficacy of fuels. These additives are added in small quantities to fuels, mainly in gasoline. In addition, fuel additives are used as combustion antioxidants, modifiers, corrosion inhibitors, and deposit control detergents.
Report Code : A07252 | Category : Materials and Chemicals
The acrylic coating is a quick drying paint, which consists of several pigments that are acrylic polymer emulsion suspended. This coating is made of acrylic or methacrylic polymer ...
Report Code : A07255 | Category : Materials and Chemicals
The global antimicrobial coatings market forecast was valued at $3.7 billion in 2020, and is projected to reach $11.0 billion by 2030, growing at a CAGR of 11.5% from 2021 to 2030.
Report Code : A07268 | Pages : 293 | Category : Materials and Chemicals
Floor is the bottom surface of a building, which supports the expected load. Similar to buildings, floor requires coatings and paintings for aesthetic appearance and protection from external ...
Report Code : A07269 | Category : Materials and Chemicals
A coating is a covering that is applied to an object’s surface. The purpose of applying the coating may be aesthetic, functional, or both. The growth of the ...
Report Code : A07275 | Category : Materials and Chemicals
Artificial food dyes are materials that enhance the appearance of food and beverages. They are produced from coal tar, petroleum, and crude oil. The life span of artificial ...
Report Code : A07298 | Category : Materials and Chemicals
Glass additive is a solid produced by cooling molten material so that the internal management of atoms or molecules remains in random sate. It is a non-crystalline, often ...
Report Code : A07313 | Category : Materials and Chemicals
The global polyaspartic coatings market was valued at $347.6 million in 2021, and is projected to reach $515.1 million by 2031, growing at a CAGR of 4% from 2022 to 2031.
Report Code : A07318 | Pages : 255 | Category : Materials and Chemicals
Agriculture chemicals or agrochemicals are pesticides and fertilizers, which are used in agriculture to control insects and weeds, prevent diseases, and help to support plant growth. Agrochemicals include ...
Report Code : A07321 | Category : Materials and Chemicals
Water-based enamel is an acrylic paint that is used to coat external surface to improve resistance to moisture, thermal protection, and varnishing. It is made up of polyurethane, ...
Report Code : A07332 | Category : Materials and Chemicals
Rubber additives are rubber polymers processed by a combination of chemicals to increase or enhance the overall performance. These additives include sulfur, sulfonamide, carbon black, thiazole, silica, amines, ...
Report Code : A07336 | Category : Materials and Chemicals
Skid resistant coatings are acrylic resins with better viscosity and low content of Volatile Organic Compound (VOC). Properties of skid resistant coatings include fast drying components, durability, substantial ...
Report Code : A07338 | Category : Materials and Chemicals
Acrylic coating is a material used for coating surfaces. They are widely applicable in the construction sector for various coating and decorative activities. They are fungus resistant, water ...
Report Code : A07344 | Category : Materials and Chemicals
Sunset yellow FCF is a synthetic acid orange dye extracted from petroleum. Sunset yellow is primarily used as an artificial color additive in food to give orange–yellow color. ...
Report Code : A07349 | Category : Materials and Chemicals
The global paper pigments market was valued at $12.6 billion in 2021, and is projected to reach $27.9 billion by 2031, growing at a CAGR of 8.4% from 2022 to 2031.
Report Code : A07377 | Pages : 216 | Category : Materials and Chemicals
Phosphorescence is the process by which energy absorbed by a substance is slowly released in the form of light. Compounds that show this property are called phosphorescent pigments. ...
Report Code : A07378 | Category : Materials and Chemicals
Aero engine coatings improve performance and lifetime of aero engines. They protect the engine from oxidation, corrosion, wear, erosion, and fouling. Aero engine sections generally experience high temperature, ...
Report Code : A07382 | Category : Materials and Chemicals
Aluminum pigment refers to a type of pigment that provides silver color with excellent metallic effects. It is manufactured by wet-milling process that includes mineral spirits and other solvents. It is primarily used to obtain lustrous, glossy, and shiny effects in the automobile industry.
Report Code : A07386 | Category : Materials and Chemicals
The global anti-microbial coatings market was valued at $4.0 billion in 2019 and is anticipated to reach $11.6 billion by 2027. The market is projected to experience growth at a CAGR of 13.3% from 2020 to 2027.
Report Code : A07413 | Pages : 284 | Category : Materials and Chemicals
Ultra-fine ath is alumina trihydrate powder utilized as a thin film curl coating. It has high shiny qualities, which give special highlights to a loop covering on metals ...
Report Code : A07531 | Category : Materials and Chemicals
Pigment dispersion is the process of breaking pigment agglomerates into primary particles. The process involves three steps, initial lubrication, separation, and stability. Pigment dispersion includes properties, such as ...
Report Code : A07556 | Category : Materials and Chemicals
