The global coating pretreatment market was valued at $4.3 billion in 2023, and is projected to reach $7.6 billion by 2033, growing at a CAGR of 5.9% from 2024 to 2033.
Report Code : A13764 | Pages : 300 | Category : Materials and Chemicals
The global special effect masterbatches market size was valued at $2.9 billion in 2020, and is projected to reach $5.3 billion by 2030, registering a CAGR of 6.2% from 2021 to 2030.
Report Code : A13769 | Pages : 420 | Category : Materials and Chemicals
Construction paints and coatings refer to paints and varnish materials including liquid and powder. These materials are used in the construction and buildings to protect and decorate various surfaces.
Report Code : A13771 | Category : Materials and Chemicals
Physical vapour deposition (PVD) is a process used to produce a metal vapour that can be deposited on electrically conductive materials as a thin, highly adhered pure metal or alloy coating.
Report Code : A13776 | Category : Materials and Chemicals
The goal of coatings for commercial and residential roofing is to improve the performance and longevity of roof. Roof coatings are meant to be applied directly to the current roof surface by spray or roll application.
Report Code : A13779 | Category : Materials and Chemicals
Cold gas spray coating, or CGS coating, is a type of thermal spray method. In this technique, supersonic compressed gas speeds up powder particles at exceedingly high speeds below their melting point temperatures
Report Code : A13782 | Category : Materials and Chemicals
Foam is the dispersion of gas into liquid. The formation of foam during the production and processing of coatings, printing inks, and plastic materials is undesirable as it can cause pinholes, cratering, creation of scum, and defects in coatings, thereby lowering efficacy and quality.
Report Code : A13824 | Category : Materials and Chemicals
The transmission of energy from the generation site to distribution hubs loses a significant amount of energy. In order to recover lost energy and limit losses, insulation is ...
Report Code : A13834 | Category : Materials and Chemicals
The global aircraft paint market was valued at $4.2 billion in 2022, and is projected to reach $6.4 billion by 2032, growing at a CAGR of 4.5% from 2023 to 2032.
Report Code : A14659 | Pages : 280 | Category : Materials and Chemicals
In working situations requiring resistance to heat, chemicals, or cleanroom conditions, low friction coatings increase performance and service life while reducing the need for wet lubricants.
Report Code : A14892 | Category : Materials and Chemicals
Conformal coating refers to a protective coating that matches the surface of assembled printed circuit boards and electronic components. This coating can protect the user from moisture, dust and corrosion that may be caused by extreme environmental conditions and improves assembly service life.
Report Code : A15499 | Category : Materials and Chemicals
Antimicrobial nanocoating comprise a modern advance in preventive healthcare. These coatings are the chemicals used to hinder the growth of microbes and pathogens, through cellular membrane agitation.
Report Code : A15501 | Category : Materials and Chemicals
Lubricating oil additives are organic or inorganic substances that are dissolved or suspended in the lubricating oil in solid form to give them specific properties according to the type, application and lubricant requirements.
Report Code : A15514 | Category : Materials and Chemicals
Liquid roofing is a process that utilises a liquid roof coating to waterproof a roof. Acrylic coatings, silicone coatings, modified silane polymers, EPDM rubbers, elastomeric membranes, and other types of liquid roofing are some of the most common.
Report Code : A15517 | Category : Materials and Chemicals
Concerns about the environmental effects of volatile organic compounds (VOCs) found in a variety of chemicals, including paints and coatings, are fuelling demand for low-VOC paints and coatings.
Report Code : A15518 | Category : Materials and Chemicals
Powder coating refers to a dry exterior finishing layer applied to goods to improve their protective properties and aesthetic appeal. Polymer saps, flow consistency admixtures, colours, and various additional additives are mixed, liquefied, chilled, and then set into a homogeneous structure in the general cycle.
Report Code : A15524 | Category : Materials and Chemicals
Paper coating binder is a crucial component in the production of paper coatings. It is used to give pigment particles adhesion and to attach them to the paper's ...
Report Code : A15580 | Category : Materials and Chemicals
Paper dyes are organic colorants used to add or change the color of a piece of paper. Colored compounds that are soluble in the application media are known as paper dyes.
Report Code : A15751 | Category : Materials and Chemicals
Protection against fire coatings is made up of various fillers and flame retardants. It is utilized to keep fire flames from spreading quickly across the surface and to limit the amount of time that they're exposed to extreme heat.
Report Code : A15752 | Category : Materials and Chemicals
Chemical vapor deposition (CVD) is a coating technique that employs gaseous reagents and thermally induced chemical reactions on a heated substrate's surface. These processes may or may not involve the substrate material.
Report Code : A15855 | Category : Materials and Chemicals
Report Overview The report provides an in-depth study of factors, such as market demand & forecast and qualitative and quantitative information, that influence the growth of the global Polyimide varnish market. The qualitative data of market rep
Report Code : A15884 | Category : Materials and Chemicals
Nano copper powder can be defined as the small copper particle size ranged from 10-9 to 10-6 m, including Nano copper particles and micron copper particles. It is brown or purplish micro powder.
Report Code : A15900 | Category : Materials and Chemicals
Packaging coating materials are used to package foods, consumer goods, medical equipment, and industrial products. These packaging materials are prone to friction and possess less chemical stability. Additives are added to improve its performance, anti-microbial properties, water-repellency, pH stability, and provides less friction surface.
Report Code : A15904 | Category : Materials and Chemicals
Pigments are the materials used to impart various colors to the products by using their ability of changing the color of reflected or transmitted light as the result of wavelength-selective absorption.
Report Code : A15930 | Category : Materials and Chemicals
Masterbatches are solid or liquid mixture of additive or pigments used for coloring or enhancing other properties of polymers such as UV stabilizing, flame retardation, antistatic and antilocking. Masterbatches can be used by several technological methods including injection
Report Code : A15948 | Category : Materials and Chemicals
