Conductive ink brings about a printed object, which conducts power. It is manufactured by mixing conductive substrates into ink. Conductive inks include silver, graphite, carbon, or some other ...
Report Code : A11596 | Category : Materials and Chemicals
A corrosion inhibitor is a chemical compound when added to a liquid gas, decreases the corrosion rate of a material, that comes into contact with any liquid. The ...
Report Code : A11597 | Category : Materials and Chemicals
Hydrophilic coating is a type of coating, which is utilized to reduce surface friction and improve lubricity. The expression "hydrophilic" implies attraction toward water. As such, it promptly ...
Report Code : A11774 | Category : Materials and Chemicals
Jet fuels have a number of drawbacks that prevent them from being stored for lengthy periods of time and make their use and delivery even more challenging. By ...
Report Code : A11776 | Category : Materials and Chemicals
The global additive masterbatch market was valued at $3.4 billion in 2023, and is projected to reach $6.1 billion by 2033, growing at a CAGR of 6% from 2024 to 2033.
Report Code : A11809 | Pages : 300 | Category : Materials and Chemicals
A coating is a protective layer that is applied to surface of an item, which is commonly referred to as a substrate. It is possible to use coating ...
Report Code : A11814 | Category : Materials and Chemicals
Ceramic inks are essential carriers for fine-particle metallic oxide pigments (not raw colorants, but preferred stain powders) utilized in automatic application procedures. These materials can be thick and ...
Report Code : A11821 | Category : Materials and Chemicals
Low temperature coatings (low cure coating) are used in cold-temperature conditions and have ability to cure at 0-degree C. These coatings are two components epoxy based coatings. The ...
Report Code : A11878 | Category : Materials and Chemicals
When it comes to preserving various sorts of medical devices used in hospitals, medical device coating is critical. These coatings improve the performance and agility of medical devices ...
Report Code : A11880 | Category : Materials and Chemicals
Refinish coating is utilized mostly in automotive repair center or body shop for refinishing vehicles. The automotive refinish coating market has shown marked development over the most recent ...
Report Code : A11894 | Category : Materials and Chemicals
The global solar panel coatings market size was valued at $2.08 billion in 2020, and is expected to reach $15.7 billion by 2030, with global solar panel coatings market forecast expected at a CAGR of 22.4% from 2021 to 2030.
Report Code : A11896 | Pages : 287 | Category : Materials and Chemicals
The global cobalt alloy powder market size was valued at $259.1 million in 2020, and cobalt alloy powder market forecast projected to reach $490.9 million by 2030, with global market forecast expected at a CAGR of 6.7% from 2021 to 2030.
Report Code : A12118 | Pages : 250 | Category : Materials and Chemicals
The global organic pigments market was valued at $5.6 billion in 2021, and is projected to reach $8.4 billion by 2031, growing at a CAGR of 4.2% from 2022 to 2031.
Report Code : A12122 | Pages : 350 | Category : Materials and Chemicals
Anti-slip additive is a type of chemical that reduces the coefficient of friction between two surfaces. These additives also aid in the preservation of the surfaces' integrity as ...
Report Code : A12558 | Category : Materials and Chemicals
Bio-plastic additives are bio-compounds that are added to plastics to improve its final and mechanical properties, performance, and other features while also being environment-friendly. Plasticizers are one of ...
Report Code : A12561 | Category : Materials and Chemicals
The global bitumen emulsifiers market was valued at $128.4 million in 2021, and is projected to reach $184.4 million by 2031, growing at a CAGR of 3.6% from 2022 to 2031.
Report Code : A12562 | Pages : 300 | Category : Materials and Chemicals
Post-retail added substances are an item for preventive support and lessening fuel-related issues. These added substances are utilized to support the effectiveness of gas and diesel fuel. They ...
Report Code : A12632 | Category : Materials and Chemicals
With growing urbanization and increased investment, there is a global demand for aesthetics. Because of technological advancement, all countries have shifted their focus to the health risks posed ...
Report Code : A12633 | Category : Materials and Chemicals
Diamond coating is a method of depositing a uniform layer of diamond on materials such as glass, plastics, metals, ceramics, and composites. The coating is achieved through the ...
Report Code : A12715 | Category : Materials and Chemicals
Construction additives are natural or synthetic materials which are mixed with building agents to enhance the property of end product and reduce the cost. Mineral additives are the ...
Report Code : A13261 | Category : Materials and Chemicals
Fluid loss additive is a chemical that controls the loss of fluid with the help of filtration. It helps the operators to retain the important features of their ...
Report Code : A13651 | Category : Materials and Chemicals
Fluoropolymer coating are the mixture of fluoropolymer lubricants and resin blinders which helps in offering features like low friction coefficients and excellent protection against corrosion and also good ...
Report Code : A13652 | Category : Materials and Chemicals
Heat-resistant coatings have properties, for example, water opposition, durability, shading maintenance, corrosion resistance, and amazing execution upon openness to high temperatures. Heat-resistant coatings are increasingly becoming an important ...
Report Code : A13663 | Category : Materials and Chemicals
The global mosquito-repellent paints market size was valued at $283.7 million in 2020, and is projected to reach $544.7 million by 2030, a CAGR of 6.8% from 2021 to 2030.
Report Code : A13732 | Pages : 274 | Category : Materials and Chemicals
Paints used to repaint buildings or similar structures are known as construction repaints. Residential, commercial, and industrial paintings are all common uses for construction repaints. Varnishes, emulsions, and enamels can all benefit from construction repaints. Maintenance, repair, remodeling, and renovation are all common uses for construction repaints.
Report Code : A13762 | Category : Materials and Chemicals
